OSCILLATOR

Description

Sawtooth-core Utility VCO

A wide range, high quality, 8hp utility VCO.  It offers a full compliment of standard waveforms including Sine, Triangle, Saw, and Pulse waves. The Oscillator offers 5 octaves of 1 volt per octave tracking, and a frequency range starting as low as 7 seconds per cycle, allowing it to double as an LFO. Additional features include oscillator reset for hard syncing, attenuated linear FM input, pulse width, and pulse width CV input.

• Excellent logarithmic conformance
•  Temperature compensated 1 volt per octave operation
• Simultaneous sawtooth, pulse triangle, and sine wave outputs
• Sawtooth wave based oscillator circuit
• PWM Input: 0% to 100%
• Hard sync input
• Below audio frequency operation

Module Controls:

• Big Knob – Coarse frequency setting
• Fine Knob – Used to fine tune the frequency of the Oscillator. This control is calibrated to a range of 1 octave.
• 1V Input – CV input used to track the Oscillator at 1 volt per octave. This input also can be used as a logarithmic FM input.
• RT – CV Input used to hard reset the Oscillator on the falling edge of the incoming waveform.
• FM Knob – Linear frequency modulation CV input attenuator.
• FM Input – Linear frequency modulation CV input.
• PW Input – Pulse width modulation CV input.  Affects the pulse width of the square wave
• PW Knob – Used to manually control the pulse width of the square wave.
• Power Connector – +12v is at the top of the connector and -12v is at the bottom of the connector.

Specification:-

• Module depth: 35mm
• Current Consumption: 30mA
• Panel size: 8HP