Tyme Sefari

Tyme Sefari is a voltage-controlled sampler/delay/looper/audio buffer developed completely in-house by The Harvestman.

Using an 8-bit microcontroller and 32kB of SRAM (no prefab delay chips here), Tyme Sefari allows you to circularly record an 8-bit audio sample, with voltage control of sampling frequency. The analog front-end of the module has a wet/dry mix control as well as a feedback attenuator (with selectable polarity).

You may optionally set two loop markers within the greater recording. When enabled, the record and playback travel will only take place between these markers. When the loop points are “inside out”, interesting distortions of the buffer contents occur when the marker controls are swept. Both marker controls are manual and voltage-controllable.

The transport controls of the Tyme Sefari allow you to control recording, record/playback reverse, loop enable, and playback (when toggled, this control restarts playback from the beginning of the recording or loop for easy one-shot sampling.) All four of these controls can be controlled by external gate voltages in addition to the panel switches.

Specification:-

• Voltage-controlled sampling rate/playback frequency.
• Voltage-controlled loop marker positions.
• Manual or gate-controlled playback direction, loop enable, record/playback
• Loop marker resolution: 64 samples
• Input attenuation control
• Feedback amount control, switchable polarity
• Wet/dry mix control
• 32kB internal RAM, 2sec minimum sampling time when loop points and sampling rate are at maximum
• +/-12V Doepfer-style power connector
• Panel size: 15HP
• Current consumption: 80mA