Multi-Envelope

£445.00

3 in stock

SKU: Verbos_.Multi-Envelope Maker: Types: , ,

Description

Dual Complex Envelope Generator

The Multi-Envelope is divided into two envelope generators, one at the top and one at the bottom. The “gate” and “trigger” inputs on the left are where sources can be plugged in to turn on the envelopes. A trigger starts the envelope at the beginning and lets it run through completely. A gate holds the envelope on the sustain stage as long as it’s high. These inputs may be used together or separately to get the re-trigger characteristic desired. The button is a manual gate control.

While the envelope plays, multiple shapes are available at the right.

Available for each generator:

Delay Attack Decay sustain Release
Attack Hold Decay sustain Release
Delay Attack Hold Release

The upper envelope adds “Attack Decay Attack sustain Release” (a unique echo type envelope shape) and stage outputs which are gates that go high while each stage is active.

Both envelopes have an end pulse, which is a 10ms trigger that goes high when the envelope completes. This output can be patched to the trigger input to loop the envelope.

The length of each stage is controlled by red sliders. The sustain level is controlled by the black slider. External voltages can be added to these controls via the jacks below the sliders.

The shape control changes the envelope from linear ramps to RC type curves as it is turned clockwise. Changing the shape will not significantly change the length of the envelope.

Connectors

upper envelope:

trigger input, gate input,

stage pulse outputs t1 to t4, end pulse output

CV inputs for time stages t1 to t4 and sustain level

envelope outputs: DADsR, AHDsR, DAHR, ADAsR

bottom envelope:

trigger input, gate input, end pulse output

CV inputs for time stages t1 to 14 and sustain level

envelope outputs: DADsR, AHDsR, DAHR

Specifications:-

  • power: 70 mA +12V, 30 mA -12v
  • width: 22hp