Sale!

A-Envelope

£440.00

1 in stock

SKU: Velectronic -.A-Envelope Maker: Types: , , , ,

Description

Associative Quadruple Envelope

A-envelope is a four independent channels ADSR envelope, with associated capabilities.

Association between channels

A-envelope allows to define channel groups, that share configuration. This capability makes it possible to define polyphonic configurations on the go up to 4 voices, in a simple way.

Each channel allows:

  • Modulate every of the ADSR stages in time or shape (Exp, Lin, Log) independently.
  • Adjust the amount of modulation using the stage knobs when acting as attenuverters.
  • Controlling the duration of each stage from 0 to 20 seconds using the stage knobs.
  • Controlling the shape of attack, decay and release stages.
  • Controlling the level of the sustain stage.
  • Configure the input activation mode as Gate, Trigger or Re-Trigger.
  • Configure the channel in single, loop or auto-loop mode.
  • Configure the BEOS (Begin and/or End Of Stage) outputs for each stage.
  • Trigger the channel manually using the test button.

User interface

The user interface is meant to give fast and direct access to every feature.

  • Instant visualization of each channel group thru the scale indicators and LED arches.
  • Direct monitoring of the signal and BEOS outputs thru specific LEDs.

Characteristics

Time ranges

Attack:

  • The minimum amount of time is 750 microseconds, under this value the stage is omitted.
  • The maximum amount of time is 20 seconds.

Decay:

  • The minimum amount of time is 750 microseconds, under this value the stage is omitted and therefore, the maximum voltage for the attack becomes the one defined by the sustain.
  • The maximum amount of time is 20 seconds.

Sustain:

  • The minimum amount of time is 750 microseconds, under this value the stage is omitted but the voltage level remains as a reference for the other stages.
  • The maximum amount of time is 20 seconds.

Release:

  • The minimum amount of time is 750 microseconds, under this value the stage is omitted
  • The maximum amount of time is 20 seconds.

Inputs

The ADSR modulation inputs

The ADSR modulation inputs accepts signals from -10 to 10 volts and a bandwidth from DC up to 20kHz. The attenuverters associated to the inputs can amplify/attenuate the input signal from 0 to x2.

Parameter

Value

Input impedance

100kOhms

Maximum input voltage

+/- 10 Volts

Bandwidth

DC to 20kHz

Trigger/Gate inputs

The trigger/gate inputs react to pulses of at least 2.5Volts and 50us.

Parameter

Value

Input impedance

100kOhms

Minimum input voltage

2.5 Volts

Minimum pulse duration

50uS

Outputs
The ADSR envelope outputs

The ADSR envelope outputs have a voltage range of 0-10 volts, and a minimum period time of 750 milliseconds using only the Attack stage. The ADSR envelope outputs are doubled to offer both direct and inverted outputs. Both sets have the same characteristics.

Parameter

Value

Output impedance

1kOhms

Output voltage

0 – 10 Volts

The BEOS outputs

The BEOS (Begin-End Of Stage) outputs have a voltage range of 0 volts when inactive and 10 volts when active.

Parameter

Value

Output impedance

1kOhms

Output voltage

0 – 10 Volts

Power consumption

The power consumption is being measured with all LEDs on.

The +5V jumper selected (Recommended)

  • +5v = 170 mA
  • +12v = 35 mA
  • -12v = 23 mA

The +12V jumper selected

  • +5v = 0 mA
  • +12v = 245 mA
  • -12v = 23 mA

Protection

  • Protection for human body model electrostatic discharge (ESD) of 2kV.
  • Power connector reverse protection.
  • Protection against power polarity inversion.

Working Temperature

  • Working ambient temperature from -20oC to 70oC.

Accuracy

  • The accuracy for all specified values is < 1%.

Specs

  • Width: 22HP
  • 38mm depth from the back of the panel to the power connector, including the connector.

User manual here

Videos

 

Firmware updates

Here you can find all the available firmware updates, including the one delivered with the module.

  • latest/a-envelope_v3_0_5.hex, 28/06/2021 DOWNLOAD

Update procedure

The A-envelope is provided with a USB A port, for firmware update purposes.

Follow the steps to perform the update.

  1. Download from the firmware list the on you want to apply.
  2. Copy the downloaded file to at the root of your USB storage device.
  3. Rename the copied file to a-envgen.hex.
  4. Power off the module.
  5. Keep pressed the Attack modulation button.
  6. Power on the module.
  7. Now the module is in boot mode.
  8. The trigger and sustain modulation buttons will get enabled and the channel buttons will blinking waiting for a USB storage device.
  9. Plug the USB storage device in the module USB port.
  10. If everything is fine, the channel buttons will show the firmware update check progress.
    1. If the firmware is not been detected, the channel buttons will remain blinking and you will need to check the previous steps.
    2. If the firmware is not a valid, or is not suitable for this module, the release shape LED will start blinking.
  11. If the firmware update check succeeds, the channel button will turn off and the loop, trigger and sustain modulation buttons will get enabled.
  12. Push the loop button to proceed with the update.
  13. The channel buttons will show the firmware update progress.
  14. Once the update terminates, the module will restart.

Now you can enjoy the new features.

Reset to factory values procedure

Follow the steps to apply the factory default values.

  1. Power off the module.
  2. Keep pressed the Attack modulation button.
  3. Power on the module.
  4. Now the module is in boot mode.
  5. The trigger and sustain modulation buttons will get enabled and the channel buttons will blinking waiting for a USB storage device.
  6. Push the sustain modulation button to proceed with the factory default values recall.
  7. Push the trigger button to restart the module.

Related products